# File generated by anaconda, then hacked manually. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "/usr/X11R6/lib/X11/fonts/TrueType" FontPath "unix/:-1" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom # this is from the sr1k config AllowMouseOpenFail EndSection # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be # required when using pre-R6 clients # ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt Meta ScrollLock Compose RightCtl Control # To disable the XKEYBOARD extension, uncomment XkbDisable. # XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:nocaps" XkbRules "xfree86" XkbModel "pc104" XkbLayout "us" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" # ALPS... try this # Protocol "GlidePointPS/2" Protocol "PS/2" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) Emulate3Buttons Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection ## this is from sr1k page #Section "XInput" # SubSection "Mouse" # Port "/dev/usbmouse0" # DeviceName "Pointer" # Protocol "IMPS/2" # Emulate3Buttons # Emulate3Timeout 50 # AlwaysCore # EndSubSection #EndSection # ********************************************************************** # Monitor section # ********************************************************************** Section "Monitor" Identifier "Primary-Monitor" VendorName "LCD 1024x768" ModelName "LCD" HorizSync 29-64 VertRefresh 47-90 Modeline "1024x768" 59.89 1024 1040 1216 1328 768 768 774 802 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # the default thing from redhat 6.2 #Section "Device" # Identifier "NeoMagic (laptop/notebook)" ## Chipset "NM2160" ## IOBase 0xfea00000 ## MemBase 0xfd000000 ## VideoRam 2048 ## DacSpeed 90 ## Option "linear" ## Option "nolinear" ## Option "sw_cursor" ## Option "hw_cursor" ## Option "no_accel" ## Option "intern_disp" ## Option "extern_disp" ## Option "mmio" ## Option "no_mmio" ## Option "lcd_center" ## Option "no_stretch" #EndSection Section "Device" Identifier "NeoMagic" VendorName "NeoMagic" BoardName "SVGA" Chipset "NM2200" Videoram 3072 Option "extern_disp" Option "intern_disp" EndSection # ********************************************************************** # Screen section # ********************************************************************** Section "Screen" Driver "SVGA" Device "NeoMagic" Monitor "Primary-Monitor" DefaultColorDepth 16 SubSection "Display" Depth 32 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection EndSection