Re: NS installation problem

[Padmaparna Haldar <haldar@ISI.EDU>]

Try to compile without the -static flag .edit ns Makefile to remove value
of the macro STATIC. alternatively you may want to configure ns
explicitly turning static option off with --disable-static.
hope this helps.

Padma.

ps. you may want to take a look at the ns problems web page. we are in the 
process of updating/adding to the problems list. 
http://www-mash.CS.Berkeley.EDU/ns/ns-problems.html


On Mon, 9 Feb 1998, Jie Lai wrote:

> Hi,
> 
> I am getting there with my Ns installation with the help of many people. 
> After otcl, tclcl, I run "make" for "ns-2.1b2". I got follows:
> 
> 
> c++ -static  -o ns \
>         tclAppInit.o  random.o rng.o ranvar.o misc.o timer-handler.o  
> scheduler.o object.o  packet.o ip.o route.o connector.o ttl.o  trace.o 
> trace-ip.o  classifier.o classifier-addr.o classifier-flow.o classifier-hash.o  
> classifier-mcast.o classifier-mpath.o replicator.o  classifier-mac.o  cbr.o 
> traffictrace.o pareto.o expoo.o telnet.o tcplib-telnet.o  agent.o message.o 
> udp.o session-rtp.o rtp.o rtcp.o ivs.o  tcp.o tcp-sink.o tcp-reno.o 
> tcp-newreno.o  tcp-vegas.o tcp-rbp.o tcp-full.o  scoreboard.o tcp-sack1.o 
> tcp-fack.o  tcp-asym.o tcp-asym-sink.o tcp-fs.o tcp-asym-fs.o  tcp-int.o chost.o 
> tcp-session.o nilist.o  integrator.o queue-monitor.o flowmon.o loss-monitor.o  
> queue.o drop-tail.o red.o  semantic-packetqueue.o semantic-red.o ack-recons.o  
> sfq.o fq.o drr.o cbq.o  hackloss.o errmodel.o  delay.o ll.o snoop.o  channel.o 
> mac.o mac-csma.o mac-802_11.o mac-multihop.o  dynalink.o rtProtoDV.o 
> net-interface.o  ctrMcast.o prune.o srm.o  sessionhelper.o delaymodel.o 
> srm-ssm.o  srm-topo.o  lib/int.Vec.o lib/int.RVec.o  lib/dmalloc_support.o 
> gen/version.o gen/ns_tcl.o  win32.o 
> -R/common/madras/ns/ns-2.1b2/../tcl-debug-1.7 
> -L/common/madras/ns/ns-2.1b2/../tcl-debug-1.7 -ltcldbg -R../tclcl-1.0b5 
> -L../tclcl-1.0b5 -ltclcl -R/usr/local/lib -L/usr/local/lib -lotcl 
> -R/common/madras/ns/ns-2.1b2/../tk8.0/unix 
> -L/common/madras/ns/ns-2.1b2/../tk8.0/unix -ltk8.0 -R../tcl8.0/unix 
> -L../tcl8.0/unix -ltcl8.0   -lXext -lX11  -lsocket -lnsl -ldl  -lm
> ld: fatal: library -ldl: not found
> ld: fatal: File processing errors. No output written to ns
> *** Error code 1
> make: Fatal error: Command failed for target `ns'
> 
> 
> There is no dynamic load library. Where does this "dl" come from ? 
> Any comments ? 
> 
> Thanks.
> 
> ====================================================================
> Jie Lai                                 jlai@winlab.rutgers.edu
> WINLAB, Rutgers University              Phone:      732-445-0626(O)
> 73 Brett Rd. 				Fax:        732-445-3693(O)
> Piscataway, NJ 08854-8060               Phone/Fax:  732-235-0833(H)
> ____________________________________________________________________
> 
> 
> 

-----------------------------
Padmaparna Haldar
ISI/USC.
310.822.1511 #352