[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [ns] validation problem
I don't know. My guess is that the problem exist because of little
endian vs. big endian differences. I have not yet been able to track
down the problme successfully.
Nader
Kaleelazhicathu R R Kumar writes:
> Hi Nader,
> Yes, I am running RedHat 6.1..will this test failure give a problem if I
> use RED in my simulation?
> Thanks.
> Renjish.
>
> -----Original Message-----
> From: Nader Salehi [mailto:[email protected]]
> Sent: Saturday, March 18, 2000 5:00 AM
> To: Kaleelazhicathu R R Kumar
> Cc: '[email protected]'
> Subject: Re: [ns] validation problem
>
> Are you running RedHat 6.1? I have seen this problem on some machines
> running such and OS but have not found out the reason yet.
>
> Nader
>
>
> Kaleelazhicathu R R Kumar writes:
> > hi all,
> > i am new to NS.while validating after installing the
> > ns-allinone-2.1b6,some tests failed for
> > "test-all-red". these tests were for flows-unforced and flows-combined.
> >
> > what should i do to rectify this? will this error affect my simulation if
> i
> > use RED.
> >
> > i did a retest by doing the following:
> >
> > cd tcl/test
> > ../../ns test-all-red
> >
> > which gives me the message:
> > no script following: "[$# -ge 1]
> > then
> > f" argument
> > while compiling
> > "if [ $# -ge 1] "
> > (file "test-all-red" line 42)
> >
> > can anyone help me out since i am new to this...
> >
> > thanks .
> > Renjish.
> >