[ns] =?utf-8?B?562U5aSNOiBbbnNdIHdoYXQgc2hvdWxkIGkgZG8/?=

["JIN Xiaohui" <xhjin@mcn.xidian.edu.cn>]

sir, i had searched the ewb page of http://www.isi.edu/nsnam/ns/ns-problems.html#general,
but there is no relative information about my question, such as validation error.
then i searched the web page of http://www.isi.edu/nsnam/ns/ns-tests.html,
it does say these test havent been validated. only tcl/ex/mac-test.tcl and so on
mainly, i want to do some simulation on wlan, but after validate, i found there are some modules failed.
such as
	 /test-all-wireless-shadowing ./test-all-wireless-lan-aodv 
      ./test-all-wireless-tdma ./test-all-wireless-gridkeeper 
      ./test-all-wireless-diffusion ./test-all-wireless-lan-newnode
i dont know whether they will effect my simulation.
who can tell me? thanks!

Best Regard

JIN Xiaohui
tel: 029-8201002
National Key Lab. of Integrated Service Network
Xidian univ. 710071, P.R.China 

-----原始邮件-----
发件人: Debojyoti Dutta [mailto:ddutta@ISI.EDU]
发送时间: 2001年9月13日 16:35
收件人: JIN Xiaohui
抄送: ns
主题: Re: [ns] what should i do?


Some tests might fail on certain machines. Please check the problems page
from the http://www.isi.edu/nsnam/ns

Debo

On Wed, 12 Sep 2001, JIN Xiaohui wrote:

> sir, i just installed ns-2.1b8a on my red hat 6.1.
> the install process is ok. but after validate process, 
> it displays as follow:
> "All test output agrees with reference output.
> validate overall report: some tests failed:
>      ./test-all-cbq ./test-all-webcache ./test-all-mcache ./test-all-plm 
>      ./test-all-wireless-shadowing ./test-all-wireless-lan-aodv 
>      ./test-all-wireless-tdma ./test-all-wireless-gridkeeper 
>      ./test-all-wireless-diffusion ./test-all-wireless-lan-newnode 
>      ./test-all-WLtutorial ./test-all-energy ./test-all-cbq-v1
> to re-run a specific test, cd tcl/test; ../../ns test-all-TEST-NAME
> Notice that some tests in webcache will fail on freebsd when -O is turned on.
> This is due to some event reordering, which will disappear when -g is turned on."
> 
> i want to do some simulation on 802.11, but there r some fail validation test as above shows.
> what should i do?
> thanks
> 
> 
> Best Regard
> 
> JIN Xiaohui
> tel: 029-8201002
> National Key Lab. of Integrated Service Network
> Xidian univ. 710071, P.R.China 
> 
>