[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ns] About wireless bandwidth
sorry for misunderstanding your question. For wired case, you have to look
into some files such as mac-802_3.{h.cc} and there functions containing
bind() methods.
----- Original Message -----
From: "Jun Zhao" <[email protected]>
To: "Wings" <[email protected]>; "Ya Xu" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, October 18, 2001 11:37 AM
Subject: Re: [ns] About wireless bandwidth
> If you use IEEE 802.11, you can set in your tcl file as:
> Mac/802_11 set bandwidth_ 2mb
>
> AFAIK, you should put the command before your node config statement.
> Otherwise it will not work.
> ----- Original Message -----
> From: "Wings" <[email protected]>
> To: "Jun Zhao" <[email protected]>; "Ya Xu" <[email protected]>
> Cc: <[email protected]>
> Sent: Wednesday, October 17, 2001 11:10 AM
> Subject: Re: [ns] About wireless bandwidth
>
>
> > Dear Sir,
> >
> > I f I want to set the MAC bandwidth of wired link , how can I do?
> > Thanks.
> >
> > Wings
> >
> > ----- Original Message -----
> > From: "Jun Zhao" <[email protected]>
> > To: "Wings" <[email protected]>; "Ya Xu" <[email protected]>
> > Cc: <[email protected]>
> > Sent: Tuesday, October 16, 2001 2:39 PM
> > Subject: Re: [ns] About wireless bandwidth
> >
> >
> > > I think bandwidth at link is not the same as in MAC or PHY. If one set
> MAC
> > > bandwidth_ as 10mb, the equivalent bandwidth_ seen from higher layers
> may
> > be
> > > 8mb or less.
> > > ----- Original Message -----
> > > From: "Wings" <[email protected]>
> > > To: "Ya Xu" <[email protected]>
> > > Cc: <[email protected]>
> > > Sent: Monday, October 15, 2001 12:49 PM
> > > Subject: Re: [ns] About wireless bandwidth
> > >
> > >
> > > >
> > > > Dear Sir,
> > > >
> > > > I calculate the TCP packet seq. numbers as the rate.
> > > > For example,set TCP PacketSize=1000bytes , time=Ts
> > > > 1000*8*seq. num
> > > > rate=--------------------- = x bps
> > > > T
> > > > The calculate rate with such method is the rate of application ?
> > > >
> > > > Besides, I run the simulation in wired network and set link
bandwidth
> > > 2Mbps.
> > > > Its rate can achieve 2Mbps. Why? The overhead doesn't exist in wired
?
> > > >
> > > > Thanks.
> > > >
> > > > Wings
> > > >
> > > > ----- Original Message -----
> > > > From: "Ya Xu" <[email protected]>
> > > > To: "Wings" <[email protected]>
> > > > Cc: <[email protected]>
> > > > Sent: Sunday, October 14, 2001 2:12 AM
> > > > Subject: Re: [ns] About wireless bandwidth
> > > >
> > > >
> > > > >
> > > > > If you are talking about the rate of your application,
> > > > > it can not reach 2M because of the protocol overhead in
> > > > > transport and mac etc.
> > > > >
> > > > > -ya
> > > > >
> > > > > On Fri, 12 Oct 2001, Wings wrote:
> > > > >
> > > > > > Dear ns-users,
> > > > > >
> > > > > > The default value of wireless bandwidth is 2Mbps.
> > > > > > Because wireless channel is broadcast environment.
> > > > > > if only one TCP flow is start up,it can use all the channel.
> > > > > > But its rate can't achieve 2Mbps. Why?
> > > > > >
> > > > > > Thanks.
> > > > > >
> > > > > > Best regard,
> > > > > > Wings
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
> >
>
>