[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ns] diffserv in wire-cum-wireless?
You can use gdb to debug your script.
Xiang
----- Original Message -----
From: "ncs" <[email protected]>
To: "Xuan Chen" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, April 11, 2000 9:19 AM
Subject: Re: [ns] diffserv in wire-cum-wireless?
> but where is the problem?
> In my script, the result of "printPolicyTable" is right. as following:
>
> Policy Table(1):
> Flow (0 to 5): Token Bucket policer, initial code point 10, CIR
1000000.0 bps, CBS 3000.0 bytes.
> Policer Table:
> Token Bucket policer code point 10 is policed to code point 11.
> Starting Simulation...
> ERROR: No Policy Table entry found for Source 0-Destination 8388609.
>
> I think maybe in the "printStats". Why it can't identify the destination
node 5 here?
> How does the "Destination 8388609" result? which procedure?
>
> thanks a lot
>
>
> ----- Original Message -----
> From: Xuan Chen <[email protected]>
> To: <[email protected]>
> Cc: <[email protected]>
> Sent: Wednesday, April 11, 2001 12:58 AM
> Subject: Re: [ns] diffserv in wire-cum-wireless?
>
>
> I don't know there is anybody who has applied diffserv to wireless
> scenarios. It may not be working. Thanks.
>
> -chen xuan
> On Tue, 10 Apr 2001 [email protected] wrote:
>
> > hi all,
> > I want to simulate diffserv in wired-cum-wireless network.
> > topo as follow:
> > s---e1---core---e2-----bs mn
> > I have addPolicyEntry [$s id] [$mn id] TokenBucket ......
> >
> > but the error message is :
> > no policy entry for 4194305-destination 0.
> > route to base-stn not known, dropping pkt
> >
> > Which node does 4194305 mean?
> > Can diffserv be implied in wired-cum-wireless network?
> > Does diffserv support hier address?
> >
> > thks
> >
> >
> > _____________________________________________
> > ���뾫Ʒ�����У��� http://shopping.263.net/category21.htm
> > IP�����������ؼ������� http://shopping.263.net/category08.htm
> >
>
> --
> Xuan Chen
> USC/ISI
>